Take your 1/10 Redcat® Ascent or Ascent Fusion to the next level with our GEN2 Rock Warrior™ chassis kit. Made from 3mm solid woven carbon fiber, this chassis kit was designed for those looking to get the most performance from their Redcat® Ascent.
This updated design works with the factory 3 link chassis mounted steering servo setup, but can also be set up with an axle mounted servo, using our available 4 link conversion kit (Sold Separately).
The 6 degree angled the center skid plate provides better performance and less belly hangs. The improved shock placement provides you with better suspension geometry and more articulation. The included carbon fiber motor mount provides the necessary clearance for complete suspension travel in the front.
The shocks can be mounted in the factory position on top of the axle, or on the lower link mounts. Both ways provide an improvement in performance due to the upper shock mounting location.
This chassis works with the stock body and mounting system, or use the included body post mounts to easily add an aftermarket body to your truck.
GEN2 New Features:
- Improved link geometry, for better suspension feel and travel.
- More clearance for the spur gear.
- Rear sits 10mm lower overall, allowing for better aftermarket body fitment.
- More shock mounting positions available
- More upper link mounting positions available.
- More overall chassis and skid clearance on the rocks.
Package Includes:
- Carbon Fiber Chassis Rails (2 Pieces)
- Carbon Motor Mount (1 Piece)
- Body Post Mounts (2 Pieces)
- High Clearance Sliders with Cab Mounts (1 Pair)
- Lower Shock Mount Spacers (8 Pieces)
- M3x10 Button Head Screws (6 Pieces, Chassis Brace Mounting)
- M3x12 Button Head Screws (4 Pieces, Body Mounts)
- M3x25 Button Head Screw (4 Pieces, Upper Shock Mounting)
- M3x30 Button Head Screw (4 Pieces, Lower Shock Mounting)
- 67mm Aluminum Chassis Brace (5 Pieces) (Choice of Black or Silver)
- Battery Strap (1 Piece)
- Cable Ties (4 Pieces)
- Instructions (Click to open)
Notes:
- We do not suggest using a link riser with the GEN2 chassis.
- You will not be able to use the factory battery tray that mounts behind the transfer case on the original Ascent. We suggest using an 850mah 3s battery or smaller mounted on the left slider.
- This is a builders chassis, extra parts may be required depending on your choice of setup.
- Design and kit contents subject to change from the renderings shown.
- 4 Link Conversion Kit is available here.